Improving material properties of a poloxamer P407 hydrogel-based hydroxyapatite bone substitute material by adding silica-A comparative in vivo study.

The structure and handling properties of a P407 hydrogel-based bone substitute material (BSM) might be affected by different poloxamer P407 and silicon dioxide (SiO2) concentrations. The study aimed to compare the mechanical properties and biological parameters (bone remodeling, BSM degradation) of a hydroxyapatite: silica (HA)-based BSM with various P407 hydrogels in vitro and in an in vivo rat model. Rheological analyses for mechanical properties were performed on one BSM with an SiO2-enriched hydrogel (SPH25) as well on two BSMs with unaltered hydrogels in different gel concentrations (PH25 and PH30). Furthermore, the solubility of all BSMs were tested. In addition, 30 male Wistar rats underwent surgical creation of a well-defined bone defect in the tibia. Defects were filled randomly with PH30 (n = 15) or SPH25 (n = 15). Animals were sacrificed after 12 (n = 5 each), 21 (n = 5 each), and 63 days (n = 5 each). Histological evaluation and histomorphometrical quantification of new bone formation (NB;%), residual BSM (rBSM;%), and soft tissue (ST;%) was conducted. Rheological tests showed an increased viscosity and lower solubility of SPH when compared with the other hydrogels. Histomorphometric analyses in cancellous bone showed a decrease of ST in PH30 (p = .003) and an increase of NB (PH30: p = .001; SPH: p = .014) over time. A comparison of both BSMs revealed no significant differences. The addition of SiO2 to a P407 hydrogel-based hydroxyapatite BSM improves its mechanical stability (viscosity, solubility) while showing similar in vivo healing properties compared to PH30. Additionally, the SiO2-enrichment allows a reduction of poloxamer ratio in the hydrogel without impairing the material properties.

Clinical insights into traumatic injury of the inferior alveolar and lingual nerves: a comprehensive approach from diagnosis to therapeutic interventions.

OBJECTIVES: This scoping review explores the risk and management of traumatic injuries to the inferior alveolar and lingual nerves during mandibular dental procedures. Emphasizing the significance of diagnostic tools, the review amalgamates existing knowledge to offer a comprehensive overview. MATERIALS AND METHODS: A literature search across PubMed, Embase, and Cochrane Library informed the analysis. RESULTS: Traumatic injuries often lead to hypo-/anesthesia and neuropathic pain, impacting individuals psychologically and socially. Diagnosis involves thorough anamnesis, clinical-neurological evaluations, and radiographic imaging. Severity varies, allowing for conservative or surgical interventions. Immediate action is recommended for reversible causes, while surgical therapies like decompression, readaptation, or reconstruction yield favorable outcomes. Conservative management, utilizing topical anesthesia, capsaicin, and systemic medications (tricyclic antidepressants, antipsychotics, and serotonin-norepinephrine-reuptake-inhibitors), proves effective for neuropathic pain. CONCLUSIONS: Traumatic nerve injuries, though common in dental surgery, often go unrecorded. Despite lacking a definitive diagnostic gold standard, a meticulous examination of the injury and subsequent impairments is crucial. CLINICAL RELEVANCE: Tailoring treatment to each case's characteristics is essential, recognizing the absence of a universal solution. This approach aims to optimize outcomes, restore functionality, and improve the quality of life for affected individuals.

Variability of the Cervical Branch Depending on the Facial Nerve Branching Pattern and Anthropometric Type of the Head.

(1) Background: Considering that the specialty literature supplies only general data about the variability of the cervical branch of the facial nerve, this study aimed to determine this branch's variation and individual peculiarities depending on the nerve branching pattern and anthropometric type of the head. (2) Methods: The study was conducted on 75 hemifaces of adult formalized cadavers. Ahead of anatomical dissection, each head was measured to establish the anthropometric type, according to Franco and colleagues. The branching patterns were then distributed according to the Davis classification. (3) Results: The number of cervical branches (CB) of the facial nerve varied from one to five branches, with the following rate: 1 CB (61.3%), 2 CB (28%), 3 CB (6.7%), 4 CB (2.7%), and 5 CB (1.3%). Seven branching patterns of the facial nerve were revealed: Type I in 18.7%, Type II in 14.7%, Type III in 20%, Type IV in 14.6%, Type V in 5.3%, Type VI in 18.7%, and Type NI in 8% (bizarre types). According to the branching pattern, the mean numbers of the cervical branches were as follows: Type I-1.6 ± 1.02; Type II-1.4 ± 0.50; Type III-1.4 ± 0.50; Type IV-1.4 ± 0.67; Type V-2.0 ± 1.41; Type VI-1.8 ± 1.12; and Type-NI-1.8 ± 0.75; p = 0.599. According to the anthropometric type of the head, the mean number of CB in the mesocephalic type (MCT) was 1.5 ± 0.82, in the dolichocephalic type (DCT), 1.7 ± 0.87, and in the brachycephalic type, (BCT) 1.8 ± 1.04; p = 0.668. (4) Conclusions: The cervical branch of the facial nerve varies depending on the facial nerve branching pattern and the anthropometric type of the head. The highest degree of variation was characteristic of BCT and Type V and the lowest, of MCT and Types II, III, and IV.

Comparison of morbidity-related parameters between autologous and allogeneic bone grafts for alveolar ridge augmentation from patients' perspective-A questionnaire-based cohort study.

INTRODUCTION: Alveolar ridge augmentation is often required before dental implant placement. In this context, autologous bone grafts are considered the biological gold standard. Still, bone block harvesting is accompanied by some serious potential disadvantages and possible complications, such as pain, bleeding, and nerve irritation. Several studies aimed to compare autologous to allogeneic bone grafts concerning bone quality and implant survival rates; this is the first prospective study analyzing and comparing morbidity-related parameters after alveolar ridge augmentation using autogenous and allogeneic bone blocks from patients' perspective. METHODS: Using a questionnaire, 36 patients were asked to evaluate the surgery as well as the post-operative period concerning pain, stress, sensibility deficits, satisfaction with, and consequences from the surgery as well as the preferred procedure for future alveolar ridge augmentations. RESULTS: No significant differences were shown regarding stress and pain during and after surgery, whereas the rate of nerve irritations was twice as high in the autologous group. The swelling was significantly higher in patients with autologous bone blocks (p = 0.001). Nevertheless, the overall satisfaction of patients of both groups was very high, with over 8/10 points. CONCLUSIONS: The swelling was the main reason for patients' discomfort in both groups and was significantly higher after autologous bone augmentation. Since this side effect seems to be a highly relevant factor for patients' comfort and satisfaction, it needs to be discussed during preoperative consultation to allow shared decision-making considering the anticipated morbidity.

Platelet-rich fibrin ensures hemostasis after single-tooth removal under factor Xa inhibitors - a clinical prospective randomized split-mouth study.

OBJECTIVES: In this prospective, double-blinded, randomized split-mouth study, the local hemostatic effect of platelet-rich fibrin (PRF) inserted into the extraction socket in patients taking factor Xa (FXa) inhibitors (apixaban, rivaroxaban, edoxaban) was compared to a hemostatic gelatine sponge (GS) as the "therapeutic gold standard" without withdrawal of oral anticoagulant therapy. MATERIALS AND METHODS: Single-tooth extraction was conducted under local anesthesia in n = 21 patients using a split-mouth design (42 teeth). Using a double-blind approach, the extraction socket on one side of the jaw was filled with PRF and on the other with a GS. Bleeding was assessed immediately after surgery, in 30 min, 1 h, 1.5 h, and on follow-up appointments in 24 h and on the 7th day. RESULTS: In 67% of cases, mild postoperative oozing could be stopped 30-90 min after tooth extraction via gauze pressure without any delayed bleeding. Concerning bleeding events, there was no difference among the PRF and GS groups and no significant difference among rivaroxaban, apixaban, and edoxaban (all p > 0.15). CONCLUSION: PRF and GS are reliable hemostatic methods in postextraction sockets of patients taking FXa inhibitors. CLINICAL RELEVANCE: Consequently, there is no need to discontinue FXa inhibitors because of a single-tooth removal, eliminating the risk of thrombus formation.

A novel alloplastic grid reconstruction plate for the mandible - Retrospective comparative clinical analysis of failure rates and specific complications.

PURPOSE: This study aimed to investigate the effect of three different osteosynthesis plate systems on failure rates and complications after continuity-interrupting mandibular resections with alloplastic reconstructions. MATERIALS AND METHODS: Records of respective patients from 2010 to 2020 were analyzed retrospectively. The analyses included the osteosynthesis plate type (2.4 MANDIBULAR (RP1: MANDIBULAR [Medicon®, Tuttlingen, Germany]; RP2: Modus® Reco 2.5 [Medartis®, Basel, Switzerland]; and RP3: Modus 2 Mandible [Medartis®, Basel, Switzerland]), extent & location of the defect, age, sex, radiotherapy, and nicotine abuse. In case of failure, timepoint, and the problem, namely oral/extraoral dehiscence, screw loosening, and plate fractures that led to removal, were analyzed. Complications were classified according to Clavien-Dindo system. RESULTS: A total of 136 patients were included. The mean follow-up time was 18 ± 26 months. Survival rates after 1, 2, and 5 years were 69.9%, 66.9%, and 64.7%, respectively. Although survival was not significantly associated with the reconstruction system, the most frequent complications were seen in cases of RP1 & RP2 when compared to RP3 (p = 0.033). In brief, dehiscences were seen significantly less often in cases of RP3 (12.5%) when compared to RP1 (44.7%) and RP2 (26.9%; p = 0.024). Fractures of the osteosynthesis systems occurred in 3 of 4 cases (75%) with RP1, in 1 of 4 cases (25%) using RP2, and in no single case using the RP3 system (p = 0.03). Most of the observed complications occurred up to 12 months postoperatively. A total plate survival rate of 64.7% and a total plate complication rate of 47.8% were seen. CONCLUSION: In conclusion, it seems that RP3 should be preferred over RP1 and RP2 regarding failure rates and complications.

How does dental implant macrogeometry affect primary implant stability? A narrative review.

PURPOSE: The macrogeometry of a dental implant plays a decisive role in its primary stability. A larger diameter, a conical shape, and a roughened surface increase the contact area of the implant with the surrounding bone and thus improve primary stability. This is considered the basis for successful implant osseointegration that different factors, such as implant design, can influence. This narrative review aims to critically review macro-geometric features affecting the primary stability of dental implants. METHODS: For this review, a comprehensive literature search and review of relevant studies was conducted based on formulating a research question, searching the literature using keywords and electronic databases such as PubMed, Embase, and Cochrane Library to search for relevant studies. These studies were screened and selected, the study quality was assessed, data were extracted, the results were summarized, and conclusions were drawn. RESULTS: The macrogeometry of a dental implant includes its surface characteristics, size, and shape, all of which play a critical role in its primary stability. At the time of placement, the initial stability of an implant is determined by its contact area with the surrounding bone. Larger diameter and a conical shape of an implant result in a larger contact area and better primary stability. But the linear relationship between implant length and primary stability ends at 12 mm. CONCLUSIONS: Several factors must be considered when choosing the ideal implant geometry, including local factors such as the condition of the bone and soft tissues at the implant site and systemic and patient-specific factors such as osteoporosis, diabetes, or autoimmune diseases. These factors can affect the success of the implant procedure and the long-term stability of an implant. By considering these factors, the surgeon can ensure the greatest possible therapeutic success and minimize the risk of implant failure.

Bisphosphonate-treatment of secondary chronic osteomyelitis of the jaw - a case report.

Secondary chronic osteomyelitis (SCO) is caused by bacterial infection leading to progressive jawbone destruction. Antibiotics are used as first-line treatment; surgical therapy is usually extensive and may not provide a cure. Bisphosphonates have been reported to be successful in patients with primary nonbacterial osteomyelitis, and literature indicates promising results in SCO. A 38-year-old patient presented with a progressive mandible-destruction 17 years after wisdom tooth extraction. Several treatment attempts have been unsuccessful. Seeking a second opinion, the patient was then interdisciplinary treated with 90 mg of intravenous pamidronate every four weeks, three times. The patient did not experience side effects presenting a considerable improvement in mouth opening and reporting a dissolvent of signs of pain or infection. The MRI showed edema reduction and decreased contrast uptake. Therefore, bisphosphonate treatment of secondary chronic osteomyelitis of the jaw is a safe and effective option in selected cases after unsuccessful first- and second-line therapy.

Steam-sterilized and degradable fused filament fabrication-printed polylactide/polyhydroxyalkanoate surgical guides for dental implants: Are they accurate enough for static navigation?

Three-dimensional (3D) printing is a rapidly evolving field and has gained increasing importance in the medical sector. However, the increasing usage of printing materials is accompanied by more wastages. With a rising awareness of the environmental impact of the medical sector, the development of highly accurate and biodegradable materials is of great interest. This study aims to compare the accuracy of polylactide/polyhydroxyalkanoate (PLA/PHA) surgical guides printed by fused filament fabrication and material jetted guides of MED610 in fully guided dental implant placement before and after steam sterilization. Five guides were tested in this study and each was either printed with PLA/PHA or MED610 and either steam-sterilized or not. After implant insertion in a 3D-printed upper jaw model, the divergence between planned and achieved implant position was calculated by digital superimposition. Angular deviation and 3D deviation at the base and the apex were determined. Non-sterilized PLA/PHA guides showed an angle deviation of 0.38 ± 0.53° compared to 2.88 ± 0.75° in sterile guides (P > 0.001), an offset of 0.49 ± 0.21 mm and 0.94 ± 0.23 mm (P < 0.05), and an offset at the apex of 0.50 ± 0.23 mm before and 1.04 ± 0.19 mm after steam sterilization (P < 0.025). No statistically significant difference could be shown for angle deviation or 3D offset at both locations for guides printed with MED610. PLA/PHA printing material showed significant deviations in angle and 3D accuracy after sterilization. However, the reached accuracy level is comparable to levels reached with materials already used in clinical routine and therefore, PLA/PHA surgical guide is a convenient and green alternative.

Combining Electrostimulation with Impedance Sensing to Promote and Track Osteogenesis within a Titanium Implant.

(1) Background: Electrical stimulation is a promising alternative to promote bone fracture healing but with the limitation of tracking the osteogenesis progress in vivo. To overcome this issue, we present an opportunity to combine the electrical stimulation of a commercial titanium implant, which promotes osteogenesis within the fracture, with a real-time readout of the osteogenic progress by impedance sensing. This makes it possible to adjust the electrical stimulation modalities to the individual patient's fracture healing process. (2) Methods: In detail, osteogenic differentiation of several cell types was monitored under continuous or pulsatile electrical stimulation at 0.7 V AC/20 Hz for at least seven days on a titanium implant by electric cell-substrate impedance sensing (ECIS). For control, chemical induction of osteogenic differentiation was induced. (3) Results: The most significant challenge was to discriminate impedance changes caused by proliferation events from those initiated by osteogenic differentiation. This discrimination was achieved by remodeling the impedance parameter Alpha (α), which increases over time for pulsatile electrically stimulated stem cells. Boosted α-values were accompanied by an increased formation of actin stress fibers and a reduced expression of the focal adhesion kinase in the cell periphery; morphological alterations known to occur during osteogenesis. (4) Conclusions: This work provided the basis for developing an effective fracture therapy device, which can induce osteogenesis on the one hand, and would allow us to monitor the induction process on the other hand.

Evaluation of Medication-Related Osteonecrosis of the Jaw (MRONJ) in Terms of Staging and Treatment Strategies by Dental Students at Different Educational Levels.

Background: The role of medication-related osteonecrosis of the jaw (MRONJ) as a dento-maxillo-facial pathology is becoming increasingly important due to its growing prevalence. The success of preventive and therapeutic measures relies mainly on the dentist's ability to correctly diagnose the disease. Methods: The aim of this study was to evaluate the skills of dental students of different educational levels in choosing the correct stage, diagnostics, and treatment option for MRONJ based on clinical and radiographic imaging (panoramic radiograph, CBCT). The study was designed as a cross-sectional cohort study. Twenty dental students were asked to complete a questionnaire in their third and fifth year of studies in which they had to correctly stage the disease, choose the radiological diagnostics and recommend the treatment. The control group contained experienced oral and maxillofacial surgeons. Results: With an overall performance of 59% (third year: 145.2/248 points; fifth year: 145.3/248 points), no statistically significant difference between the educational levels could be observed. The classification based on CBCT imaging was significantly more often correct compared to panoramic radiographs (p < 0.001). Conclusions: This study highlights students' lack of knowledge in staging, diagnostics, and treatment of MRONJ, even though the CBCT positively affected decision-making. No significant increase in knowledge could be confirmed through clinical education. This study highlights the need for students to catch up on MRONJ diagnostics and treatment planning. Further expansion of teaching in this disease's context and X-ray diagnostics is needed.

Comparison of Hyperspectral Imaging and Microvascular Doppler for Perfusion Monitoring of Free Flaps in an In Vivo Rodent Model.

To reduce microvascular free flap failure (MFF), monitoring is crucial for the early detection of malperfusion and allows timely salvage. Therefore, the aim of this study was to evaluate hyperspectral imaging (HSI) in comparison to micro-Doppler sonography (MDS) to monitor MFF perfusion in an in vivo rodent model. Bilateral groin flaps were raised on 20 Sprague−Dawley rats. The femoral artery was transected on the trial side and re-anastomosed. Flaps and anastomoses were assessed before, during, and after the period of ischemia every ten minutes for overall 60 min using HSI and MDS. The contralateral sides' flaps served as controls. Tissue-oxygenation saturation (StO2), near-infrared perfusion index (NPI), hemoglobin (THI), and water distribution (TWI) were assessed by HSI, while blood flow was assessed by MDS. HSI correlates with the MDS signal in the case of sufficient and completely interrupted perfusion. HSI was able to validly and reproducibly detect tissue perfusion status using StO2 and NPI. After 40 min, flap perfusion decreased due to the general aggravation of hemodynamic circulatory situation, which resulted in a significant drop of StO2 (p < 0.005) and NPI (p < 0.005), whereas the Doppler signal remained unchanged. In accordance, HSI might be suitable to detect MFF general complications in an early stage and further decrease MFF failure rates, whereas MDS may only be used for direct complications at the anastomose site.

Effects of throat packs in upper airway surgery under intubation anesthesia: a randomized controlled trial.

INTRODUCTION: Throat packs (TP) are used in upper airway surgery to avoid accumulation and aspiration of blood, foreign bodies, and fluids. But side effects such as sore throat and TP retention have been reported and challenge the standardized use of TP. The aim of this study is to compare benefits and side effects of TP versus no TP for upper airway procedures in intubation anesthesia. MATERIAL AND METHODS: One hundred forty-eight patients with surgical interventions at the upper airway under intubation anesthesia were included. Of those, n = 74 each were treated without (A, control) and with (B) TP. Study group B was subdivided whether TP was placed by the surgeon (B1; n = 37) or by the anesthesiologist (B2; n = 37). TP-related side effects such as sore throat, foreign body sensation, hoarseness, dyspnea, difficulty of swallowing, nausea, retching, nausea, aspiration, and pneumonia as well as the influence of TP design and the applicant (surgeon or anesthetist) were analyzed. RESULTS: A significantly increased rate of difficulty of swallowing (p = 0.045), intensity of sore throat (p = 0.04), and foreign body sensation (p = 0.024) was found in group B when compared to group A. There was no correlation between hoarseness, dyspnea, nausea, retching, and TP. No case of aspiration or pneumonia was seen but one TP was accidentally forgotten in the patient. B2 showed an increased frequency of difficulty swallowing, followed by A and B1. B1 led to the highest incidence of nausea followed by the A and B2. CONCLUSION: The use of TP led to a high rate of side effects without showing the propagated advantages. CLINICAL RELEVANCE: The use of TP must be considered critically and cannot generally be recommended without specific reasons, such as high aspiration risk.

Long-Term Donor Site Morbidity and Flap Perfusion Following Radial versus Ulnar Forearm Free Flap-A Randomized Controlled Prospective Clinical Trial.

This clinical prospective randomized controlled study aimed to investigate the differences between Radial (RFFF) and Ulnar (UFFF) Forearm Free Flap in terms of success, performance, and donor site morbidity. Thirty patients with reconstruction of the head and neck region were included. For the first time, this study assessed flap-perfusion characteristics, donor-site-wound-healing dynamics and hand perfusion using hyperspectral imaging. Further, subjective (Likert-scale, DASH-score) and objective (grip/pinch-strength) parameters of donor site morbidity were analysed. Postoperative follow-up was performed until 6 months after index surgery. With 100% of patients, RFFF and UFFF were equally successful. Compared to surrounding reference, UFFF revealed significant lower tissue oxygenation saturation (StO2) than RFFF. Compared with UFFF, blood flow in both the thenar and hypothenar region were significantly reduced 6 months following RFFF transfer. After four weeks, 27% more patients demonstrated impaired wound healing following RFFF transfer. After 6 months, epithelial-surface continuity was restored in all patients of both groups. After 6 months, overall rates of both subjective and objective donor site morbidity were comparable between RFFF and UFFF. RFFF and UFFF both demonstrate similar success rates and HSI-perfusion dynamics following transfer. After 4 weeks, wound-healing disorder appeared significantly more often in RFFF than in UFFF; however, they became equal after 6 months. RFFF and UFFF can be considered as mutual alternatives.

Osseointegration of a New, Ultrahydrophilic and Nanostructured Dental Implant Surface: A Comparative In Vivo Study.

This study compared the osseointegration of acid-etched, ultrahydrophilic, micro- and nanostructured implant surfaces (ANU) with non-ultra-hydrophilic, microstructured (SA) and non-ultrahydrophilic, micro- and nanostructured implant surfaces (AN) in vivo. Fifty-four implants (n = 18 per group) were bilaterally inserted into the proximal tibia of New Zealand rabbits (n = 27). After 1, 2, and 4 weeks, bone-implant contact (BIC, %) in the cortical (cBIC) and spongious bone (sBIC), bone chamber ingrowth (BChI, %), and the supra-crestal, subperiosteal amount of newly formed bone, called percentage of linear bone fill (PLF, %), were analyzed. After one week, cBIC was significantly higher for AN and ANU when compared to SA (p = 0.01 and p = 0.005). PLF was significantly increased for ANU when compared to AN and SA (p = 0.022 and p = 0.025). After 2 weeks, cBIC was significantly higher in SA when compared to AN (p = 0.039) and after 4 weeks, no significant differences in any of the measured parameters were found anymore. Ultrahydrophilic implants initially improved osseointegration when compared to their non-ultrahydrophilic counterparts. In accordance, ultrahydrophilic implants might be appropriate in cases with a necessity for an accelerated and improved osseointegration, such as in critical size alveolar defects or an affected bone turnover.

Bleeding disorders in implant dentistry: a narrative review and a treatment guide.

PURPOSE: Considering a high prevalence of congenital and especially acquired bleeding disorders, their heterogeneity and the multitude of possible treatments strategies, a review of the scientific data on this topic is needed to implement a treatment guide for healthcare professionals. METHODS: A selective literature review was performed via PubMed for articles describing oral surgery / dental implant procedures in patients with congenital and acquired bleeding disorders. Out of the existing literature, potential treatment algorithms were extrapolated. RESULTS: In order to assess the susceptibility to bleeding, risk stratification can be used for both congenital and acquired coagulation disorders. This risk stratification, together with an appropriate therapeutic pathway, allows for an adequate and individualized therapy for each patient. A central point is the close interdisciplinary cooperation with specialists. In addition to the discontinuation or replacement of existing treatment modalities, local hemostyptic measures are of primary importance. If local measures are not sufficient, systemically administered substances such as desmopressin and blood products have to be used. CONCLUSIONS: Despite the limited evidence, a treatment guide could be developed by means of this narrative review to improve safety for patients and practitioners. Prospective randomized controlled trials are needed to allow the implementation of official evidence-based guidelines.

Extracorporeal Shock Wave Therapy Improves In Vitro Formation of Multilayered Epithelium of Oral Mucosa Equivalents.

Oral mucosa is used in various surgical fields as a graft for the reconstruction of tissue defects. Tissue engineering of oral mucosa equivalents using autologous cells represents a suitable less burdensome alternative. The survival of the multilayered epithelium is essential for the functionality of the tissues in vivo. To ensure its functionality after transplantation, mucosa equivalents in vitro were subjected to extracorporeal shock wave therapy (ESWT) to determine whether this treatment stimulated the formation and differentiation of the epithelium. Mucosa equivalents treated with ESWT were examined for cellular metabolic activity using AlamarBlueTM assay. The formation of vascular structures, basement membrane, and multilayered epithelium were examined using confocal fluorescence microscopy and immunohistochemistry. The potential ingrowth in vivo was simulated using the chorioallantoic membrane model (CAM assay) in ovo. ESWT on culture day 19 of oral mucosa equivalents resulted in slightly increased cellular metabolic activity. The in vitro development of basement membrane and multilayer epithelium was stimulated by ESWT. Additionally, in the CAM assay, ESWT led to a more pronounced multilayered epithelium. Thus, ESWT stimulated the formation of a more distinct and differentiated multilayered epithelium of oral mucosa equivalents in vitro and might increase the chance of efficient ingrowth, survival, and functionality of tissue equivalents in vivo.

Can Teledentistry Replace Conventional Clinical Follow-Up Care for Minor Dental Surgery? A Prospective Randomized Clinical Trial.

(1) Background: Born out of necessity, the implementation of digital processes experienced significant increase during the COVID-19 pandemic. Here, telemedicine offered a bridge to care and now an opportunity to reinvent virtual and hybrid care models, with the goal of improved healthcare access, outcomes, and affordability. The aim of this monocentric prospective, randomized trial was to compare conventional to telephone follow-up after minor dentoalveolar surgery on the basis of special aftercare questionnaires. (2) Methods: Sixty patients who underwent dentoalveolar surgery under local anesthesia were randomly assigned to both groups. After an average of four days, either telephone follow-up (test) or conventional personal aftercare (control) was performed. Based on the questionnaire, the following subject areas were evaluated: symptoms, complications, satisfaction with practitioner, travel, and waiting time, as well as the preferred form of follow-up care. (3) Results: There was no statistically significant difference regarding frequency of symptoms or complication rate. Patients who were assigned to the test group showed a clear tendency to prefer telephone follow-up (83.3%) to conventional aftercare (16.7%, p = 0.047). (4) Conclusions: The data suggest high acceptance of telephone-only follow-up after dentoalveolar surgery. The implementation of telemedicine could be a time- and money-saving alternative for both patients and healthcare professionals and provide healthcare access regardless of time and space.

Biomechanical evaluation of cyanoacrylate-based tissue adhesive for intraoral wound closure.

OBJECTIVES: The aim of this study was to analyze the biomechanical characteristics of a novel cyanoacrylate-based tissue adhesive (CTA) for soft-tissue closure of the (non-) tooth-bearing alveolar process and around dental implants. MATERIALS AND METHODS: Halves of porcine mandibles (n = 21) were randomly divided into three experimental intraoral wound closure groups (A-C) with three different mucoperiosteal flap types (F1-3, n = 7 each): F1, crestal incision between the last incisor and the canine with a mesial and distal vestibular relief; F2, crestal double-T-shaped incision and dental implant placement between the canine and the first premolar; and F3, trapezoidal incision on the second premolar. F1-3 were respectively closed using (A) monofil non-resorbable sutures, (B) CTA, and (C) a combination of both. Tensile strength (TS) and elasticity (E) measurements were performed for biomechanical analysis. RESULTS: In F1, CTA showed a significantly reduced TS compared to A (p < 0.001) and C (p < 0.01). In F2, an increased TS of C compared to A (p < 0.01) and B (p < 0.001) was found. Here, E was significantly increased in C compared to B (p < 0.02). In F3, TS was significantly decreased in B compared to A (p < 0.01) and C (p < 0.001). The E in group C was significantly increased compared to B (p < 0.01). CONCLUSIONS: Different biomechanical characteristics between CTA and sutures were found. CTA could be a possible alternative to sutures for intraoral wound closure in special conditions. CLINICAL RELEVANCE: A combination of both, suturing and CTA, could be a promising option in critical soft-tissue wounds requiring high functional stability and elasticity.

Buccal Bone Thickness in Anterior and Posterior Teeth-A Systematic Review.

(1) Background: Immediate dental implant placement has been a subject of great interest over the last decade. Here, information regarding the anatomy and bone thickness of the jaw prior to dental implant placement is crucial to increase the surgery's success and the patient's safety. The clinical premises for this approach have been controversially discussed. One of those heavily discussed premises is a buccal bone thickness of at least 1 mm thickness. This meta-analysis aims to systematically review buccal bone thickness (BBT) in healthy patients. Thus, the feasibility of immediate dental implant placement in daily practice can be assessed. (2) Methods: A search in the electronic databases was performed to identify articles reporting on BBT that was measured by computed tomography in adults. (3) Results: We were able to find 45 studies, including 4324 patients with 25,452 analyzed teeth. The analysis showed a BBT at the alveolar crest of 0.76 ± 0.49 mm in the maxillary frontal and of 1.42 ± 0.74 mm in the maxillary posterior region. In the mandible, the average measured values were similar to those in the maxilla (front: 0.95 ± 0.58 mm; posterior: 1.20 ± 0.96 mm). In the maxillary frontal region 74.4% and in the mandibular frontal region 61.2% of the crestal buccal bones showed widths <1 mm. (4) Conclusions: In more than 60% of the cases, the BBT at the alveolar crest is <1 mm in maxillary and mandibular frontal regions. This anatomic data supports careful pre-surgical assessment, planning of a buccal graft, and critical selection of indication for immediate implant placement, especially in the maxillary and mandibular frontal and premolar region.